The power behind
every strip
Right-sized 12V/24V transformers and smart controllers to drive your LED strip lighting reliably — matched to your run, certified, and ready to install.
Find your perfect transformer or controller
Browse the full 12V/24V transformer and controller range below — Australian certified, Perth stock and support.
Transformers and Controllers, Correctly Sized
Step mains power down to a safe, steady low-voltage supply, then add dimming or colour control — sized to your run, not over- or under-powered.
Get the sizing wrong and strips run dim, flicker, or fail early.
Controllers add dimming, RGB/RGBW colour changing or CCT control, depending on your strip.
Australian-certified units are available for damp areas, outdoor runs and bathrooms.
Sizing the transformer
Every 12V/24V LED strip needs a transformer (driver) to step mains power down to a safe, steady low-voltage supply — a single run, a whole room, or a multi-zone install can all be matched to the right unit.
Controllers add the control
Controllers sit between the transformer and the strip, giving you dimming, colour changing (RGB/RGBW) or colour-temperature control (CCT), from simple remotes through to smart, app- and voice-controlled units.
Indoor or IP-rated
IP-rated, Australian-certified units are included throughout the range for damp areas, outdoor runs and bathrooms, alongside standard indoor-only drivers for cost-sensitive jobs.
Not sure what pairs with your strip? Use the Strip Light Finder or the Lighting Layout App above, or call our Perth-based team on (08) 9297 2969 and we'll spec the transformer and controller for you.